HP storageworks msa1000 Installation Manual page 104

My MSA1000 Worksheets
Table 10: Information about the Hard Drives in my MSA1000
Note: Recording information about your hard drives is a two-step process.
As you configure your storage, record information about the drives in this table and turn to
"Information about my Arrays and
Drive Bay
SSCI ID
SCSI Bus
Transfer Rate
(Ultra 320?)
Capacity
Spindle
Speed
Array Letter
Spare Drive?
Note:
If you have one or more single-bus storage enclosures attached to your MSA1000, use this table in
conjunction with
Enclosures" on page 105.
If you have an MSA1000 with an attached dual-bus storage enclosure, use this table in
conjunction with
is Attached" on page 106.
104
LUNs" on page 107 to record information about the arrays.
Table 11 "Information about the Hard Drives in my Attached Single-Bus Storage
Table 12 "Information about the Hard Drives when a Dual-Bus Storage Enclosure
Table 13:
MSA1000 Installation Guide