Table of Contents
Advertisement
Figure 12.
•
DNS (IP) — Press the
◄ and ►
values. The range is 0.0.0.0 to 255.255.255.255 (the default is 127.0.0.1).
Domain name — Displays the domain name.
•
•
MAC address — Displays the MAC hardware address of the interface.
Display Submenu
This submenu contains settings to adjust the display and sleep timer.
Figure 13.
Auto Brightness mode — Press the ◄ or ►
•
the Auto Brightness feature. When enabled, the LCD screen and button illumination
levels are automatically adjusted to the amount of ambient room light.
Brightness level — Press the ◄ and ►
•
level of the LCD screen. When this is set, the Auto Brightness feature is disabled.
•
Sleep Timer mode — Press the ◄ or ►
Sleep mode. Sleep mode activates after a certain amount of time of inactivity passes.
The time is determined by the Sleep Timeout setting.
To deactivate Sleep mode after it has been activated, perform one of the following:
Press a button on the front panel.
•
With Wake on Motion mode enabled, make a motion near the device.
•
CCI Pro 700 TouchLink Pro Conference Room Control Interface • Setup Menu
Network Submenu — Page 2
]
Navigation
buttons to move the cursor position and the
Navigation
Display Submenu
button to edit the DNS address. Use the
button to enable or disable
Navigation
buttons to select the brightness
Navigation
button to enable or disable
Navigation
to enter
Keypad
13
Advertisement
Table of Contents
