Table of Contents
Advertisement
Software Overview
To design a graphical user interface (GUI) for the CCI Pro 700 and configure button
functions, perform the following steps:
1.
Download and install GUI Designer and Global Configurator Plus and Professional to a
computer connected to the same network as the control processor and CCI Pro 700
(see
Software Download
2.
Design and build the layout of the text and graphics using GUI Designer.
3.
Import the layout or project to Global Configurator Plus and Professional.
4.
Assign functions to the text, graphics, and front panel buttons using Global Configurator
Plus and Professional.
5.
Build and upload the project to the control processor and interface.
Software Download
The programs can be downloaded from the Extron website (www.extron.com).
NOTE: An Extron Insider account is required to download Global Configurator Plus and
Professional.
Figure 19.
1.
Go to the Extron website.
2.
Click the
3.
On the left sidebar, click the
TIP: If Global Configurator Plus and Professional, GUI Designer, or Toolbelt are
CCI Pro 700 TouchLink Pro Conference Room Control Interface • Configuration Software
on page 18 and
Software Download
tab (see figure 19,
Download
Software
featured in the left sidebar or the software
associated link to go to the individual product page. Click the
and skip steps 4 and 5.
Software Installation
).
1
link (
).
2
Download Center
on page 19).
page, click the
button
Download
18
Advertisement
Table of Contents
