Nexcom PEAK 6320A User Manual page 57

PEAK 6320A User's Guide
H. Doze
(*) Remark 1
I. Suspend Mode
(*) Remark 1
J. HDD Off
After:
BIOS Setup
1. Disable System will never enter STANDBY mode
2. 1 Min Defines the continuous idle time before the
2 Min system entering STANDBY mode.
4 Min
6 Min if any item defined in (J) is enabled & active,
8 Min STANDBY timer will be reloaded
10 Min
20 Min
30 Min
40 Min
1 Hr
Note: Normally,STANDBY
mode puts the system
into low speed or 8
MHz, screen may be
off depend on (E)
1. Disable System will never enter SUSPEND mode
2. 1 Min Defines the continuous idle time before the
2 Min system entering SUSPEND mode.
4 Min
6 Min if any item defined in (J) is enabled &
8 Min active, SUSPEND timer will be reloaded
10 Min
20 Min
30 Min
40 Min
1 Hr
Note: Normally,SUSPEND
mode puts the system
into low speed or 8
MHz, clock is
stopped, screen may
be off depend on (E)
1. Disable HDD's motor will not off
2.10 Sec Defines the continuous HDD idle time
1 Min before the HDD entering power saving
10 Min mode (motor off)
30 Min
1 Hour
4- 26