Nexcom PEAK 6320A User Manual page 45

PEAK 6320A User's Guide
Disabled BIOS w ill not search for the type of floppy disk drive by track number.
Note that there will not be any warning message if the drive
installed is 360K.
Boot Up NumLock Status
The default value is On.
On Keypad is number keys
Off Keypad is arrow keys
Typematic Rate Setting
This determines the typematic rate.
Enabled Enable typematic rate and typematic delay
programming
Disabled Disable typematic rate and typematic delay
programming. The system BIOS will use default
value of this 2 items and the default is controlled by
keyboard.
Typematic Rate (Chars/Sec)
6 6 characters per second
8 8 characters per second
10 10 characters per second
12 12 characters per second
15 15 characters per second
20 20 characters per second
24 24 characters per second
30 30 characters per second
Typematic Delay (Msec)
When holding a key, the time between the first and second character displayed.
250 250 msec
500 500 msec
750 750 msec
BIOS Setup 4- 14