Ground - Nexcom PEAK 6320A User Manual

PEAK 6320A User's Guide
Chipset features setup
This setup page includes all the items of chipset special features. See Page 4-16 to Page
4-20 for details.
Power Management setup
This category determines how much power consumption for system after selecting
below items. Default value is Disable. See Page 4-21 to Page 4-25 for details.
PNP/PCI CONFIGURATION
This category specifies the assignment of all the IRQ's and DMA's.
See Page 4-26 to Page 4-27 for details.
Load BIOS defaults
BIOS defaults indicates the most appropriate value of the system parameter which the
system would be in minimum performance. The OEM manufacturer may change the
defaults through MODBIN before the binary image burn into the ROM.
Load setup defaults
Chipset defaults indicates the values required by the system for the maximum
performance. The OEM manufacturer may change to defaults through MODBIN
before the binary image burn into the ROM.
Integrated Peripherals System Environment
This category allows you to set up all the on board I/O controllers like IDE, SCSI, FDC,
etc,. See Page 4-28 to Page 4-30
Password Setting
Change, set, or disable password of supervisor or user. It allows you to limit access to
the system and Setup, or just to Setup. See Page 4-31 for details.
BIOS Setup 4- 5