Nexcom PEAK 6320A User Manual page 60

PEAK 6320A User's Guide
PnP/PCI Configuration
This section describes configuring the PCI bus system. PCI, or
Peripheral Component Interconnect, is a system which allows I/O
devices to operate at speeds nearing the speed the CPU itself uses when
communicating with its own special components. This section covers
some very technical items and it is strongly recommended that only
experienced users should make any changes to the default settings.
PNP OS Installed
Resource Controlled By
Reset Configuration Data
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ- 9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
DMA-0 assigned to
DMA-1 assigned to
DMA-3 assigned to
DMA-5 assigned to
DMA-6 assigned to
DMA-7 assigned to
BIOS Setup
ROM PCI/ISA BIOS (PEAK-6320A)
PNP/PCI CONFIGURATION
AWARD SOFTWARE, INC.
Slot 1 Use IRQ No.
: Yes
: Manual Slot 2 Use IRQ No
: Disabled Slot 3 Use IRQ No
: PCI/ISA PnP Slot 4 Use IRQ No.
: PCI/ISA PnP Used MEM base addr.
: PCI/ISA PnP Used MEM Length
: PCI/ISA PnP Assign IRQ For USB
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: Legacy ISA
: Legacy ISA
: PCI/ISA PnP ESC : Quit
: PCI/ISA PnP F1 : Help
: PCI/ISA PnP F5 : Old Values
: PCI/ISA PnP F6 : Load BIOS Defaults
: PCI/ISA PnP F7 : Load Setup Defaults
: PCI/ISA PnP
: Auto
: Auto
: Auto
: Auto
: N/A
: 8K
: Disable
↑ ↓ → ←: Select Item
PU/PD/+/- : Modify
(Shift) F2 : Color
4- 29