Honeywell MRP-2002 Instruction Manual page 103

Template 1: Cross-Zone System - With Horn
Device Installation Example for Template 1
Output Circuit #2
Horn NAC
Output
Circuit #1
Release
Solenoid 1
Notes:
1. All End-of-Line Resistors, illustrated in this example, are 4.7KΩ, ½ watt (PN: 71252).
2. All devices are connected as Class B circuits. For details on connecting as Class A circuits,
refer to "CAC-5X Class A Converter Module" on page 31.
MRP-2002 Series Instruction Manual — P/N 53049:E5 7/28/2016
Input Circuit #1
2-Wire Smoke
Input Circuit #2
2-Wire Smoke
Input Circuit #3
Manual Release
Input Circuit #4
Abort Switch
Input Circuit #5
Pull Station
FACP Configuration Templates
Output
Output
Circuit #3
Circuit #4
Alarm
Alarm
NAC
NAC
Input Circuit
#6
Supervisory
103