Step
2.
Enter interface view.
3.
Enable NetStream.
4.
Exit to system view.
5.
Set a NetStream
aggregation mode and
enter its view.
6.
Configure the
destination address and
the destination UDP port
number for the
NetStream aggregation
data export.
7.
Configure the source
interface for NetStream
aggregation data
export.
8.
Enable the NetStream
aggregation
configuration.
Configuring attributes of NetStream export data
Configuring NetStream export format
The NetStream export format exports NetStream data in version 5 or version 9 formats, and the data
fields can be expanded to contain more information, including the following:
Statistics about source AS, destination AS, and peer ASs in version 5 or version 9 export format.
•
Statistics about BGP next hop in version 9 format only.
•
To configure the NetStream export format:
Command
interface interface-type
interface-number
ip netstream { inbound | outbound }
quit
ip netstream aggregation { as |
destination-prefix | prefix |
prefix-port | protocol-port |
source-prefix | tos-as |
tos-destination-prefix | tos-prefix |
tos-protocol-port | tos-source-prefix
| tos-bgp-nexthop }
ip netstream export host ip-address
udp-port [ vpn-instance
vpn-instance-name ]
ip netstream export source interface
interface-type interface-number
enable
95
Remarks
N/A
Disabled by default.
N/A
N/A
By default, no destination address or
destination UDP port number is
configured in NetStream
aggregation view.
If you expect to export only
NetStream aggregation data,
configure the destination address in
related aggregation view only.
Optional.
By default, the interface connecting
to the NetStream server is used as the
source interface.
•
Source interfaces in different
aggregation views can be
different.
•
If no source interface is
configured in aggregation view,
the source interface configured in
system view, if any, is used.
•
HP recommends you connect the
network management interface to
the NetStream server.
Disabled by default.