Standards And Approvals For The Tim 3V-Ie Variants And The Tim 4R-Ie - Siemens SINAUT ST7 System Manual

Note
The Ringer Equivalence Number (REN) assigned to each terminal device provides an
indication of the maximum number of terminals allowed to be connected to a telephone
interface. The termination on an interface may consist of any combination of devices subject
only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices
does not exceed 5.
REN: 0.9
Repair Service Center:
SIEMENS Energy & Automation, Inc.
Factory Service Center
3000 Bill Garland Road
Johnson City, Tennessee 37605
Tel. +1 (423) 461-3000
1.12.2

Standards and approvals for the TIM 3V-IE variants and the TIM 4R-IE

Product name
Name
TIM 3V-IE
TIM 3V-IE Advanced
TIM 4R-IE
Note
You can find the currently valid certificates and approvals on the type plate of each product.
IEC 61131-2
The SINAUT products listed above fulfill the requirements and criteria of the IEC 61131-2
standard (Programmable Logic Controllers, Part 2: equipment requirements and
verifications).
CE mark
The SINAUT products listed above fulfill the requirements and protection goals of the
following EC directives and meet the harmonized European standards (EN) that have been
published for the programmable logic controllers in the official journals of the European
communities:
Station control system
System Manual, 07/2009, C79000-G8976-C178-07
Introduction to the SINAUT ST7 system
1.12 Standards and approvals of SINAUT ST7 products
Order number
6NH7 800-3BA00
6NH7 800-3CA00
6NH7 800-4BA00
83