Technical Specifications Of The Tim 4R-Ie - Siemens SINAUT ST7 System Manual

Introduction to the SINAUT ST7 system
1.3 SINAUT TIM communication modules
● Can be operated without a fan
● A backup battery and a memory module (C-PLUG) can be installed as options.
The following figure shows the ports of the TIM 4R-IE (schematic representation with front
panel removed).
Figure 1-4
1.3.7

Technical specifications of the TIM 4R-IE

Technical specifications of the TIM 4R-IE
TIM 4R-IE
General
Transmission rate
•
•
Interfaces
•
•
•
Cable length
•
•
•
Power supply
24
24 V
Ports of the TIM 4R-IE
RS-232/RS-485
Ethernet
Communication port,
electrical
Connection to power supply
Slot for exchangeable media
RS-232
RS-485
RJ-45
2 x
RS-232/RS-485 port
(9-pin, male):
Access to WAN over
External Modem
2 x
RJ-45 port
Access to Ethernet
50 to 38,400 bps
•
10/100 Mbps autosensing
•
- 9-pin D-sub male, RS-232,
•
- RJ-45 (10/100 Mbps; TP)
1 x 2-pin plug-in terminal strip
•
C-PLUG (optional)
•
max. 6 m
•
max. 30 m
•
max. 10 m
•
24 V DC; min. 20.4 V; max. 28.8 V
can be switched over to RS-485;
System Manual, 07/2009, C79000-G8976-C178-07
Station control system