Siemens SINAUT ST7 System Manual page 168

Installing and putting a TIM into operation
4.6 Configuring a TIM and setting parameters
Figure 4-29
You can select the TIM you want to install in a rack from this catalog. The following figure
shows an S7-300 station with a TIM and various other modules installed.
Assigning parameters to the TIM
If you double-click on the TIM module, you open the parameter assignment dialog for the
TIM. You can then specify the required properties in a series of tabs.
168
Hardware Catalog
The catalog window with the SINAUT ST7 folder open
System Manual, 07/2009, C79000-G8976-C178-07
Station control system