Siemens SINAUT ST7 System Manual page 79

EU Directive EMC 2004/108/EEC
The products listed above comply with the requirements of the EU Directive 2004/108/EEC
"Electromagnetic Compatibility" and the Harmonized European Standards (EN) published in
this connection.
EU Directive TTE 1999/5/EEC
The products listed above comply with the requirements of the EU Directive 1999/5/EU
"Directive of the European Parliament and Council Governing Radio and Telecommunication
Terminal Equipment and the Mutual Recognition of their Conformity".
Area of application
The product meets the following requirements:
Area of application
Equipment in areas without special
protection
Industry
Domestic
1 CTR / TBR 15
CTR / TBR 17
2 CTR / TBR 3
Installation guidelines
The products meet the requirements if you adhere to the configuration instructions contained
in this product documentation, see section Installation guide (Page 99), and installation
instructions, see sections Installing and putting a TIM into operation (Page 131)Installing and
putting a SINAUT modem into operation (Page 181).
Station control system
System Manual, 07/2009, C79000-G8976-C178-07
In accordance with the EU directives mentioned above, the EU conformity
declarations are available for the relevant authorities at the following
address:
Siemens Aktiengesellschaft
Industrial Solutions & Services
I&S IS 6 E D
Postfach 3249
D-91050 Erlangen
Emission
-
* EN 55022 (A) : 1998
** EN 55022 (B) : 1998
Analog leased lines, 2-wire
Analog leased lines, 4-wire
Digital leased lines
Introduction to the SINAUT ST7 system
1.12 Standards and approvals of SINAUT ST7 products
Requirements
EN 60870-2-1 : 1996
Immunity
79