Overview For Ordering Sinaut St7 Software; Installation Of The Sinaut St7 Standard Software Package - Siemens SINAUT ST7 System Manual

Introduction to the SINAUT ST7 system
1.9 The SINAUT ST7 standard software package
1.9.3

Overview for ordering SINAUT ST7 software

Table 1- 9 Overview for ordering SINAUT ST7 software
Short name Order no.
SW ST7 6NH7997-0CA15-0AA0
UPGR SW ST7 6NH7997-0CA15-0GA0
1.9.4

Installation of the SINAUT ST7 standard software package

The following requirements must be met to install any or all components of the software
package:
● Operating system: Windows Server 2003 SP2, Windows XP SP2 or Windows Vista 32 Bit
● The installed STEP 7 software must be version 5.4 SP4 or higher.
If the
automatically when you insert the CD. Otherwise, use the Explorer to open the root directory
on the CD and click on the
The setup program checks which components on the CD can be installed and then displays
a list from which you can make your selection. Setups are currently available for the
following components.
● SINAUT ST7 configuration: Basic version V5.0
● SINAUT TD7 library V2.2
66
Ultimate and Business
Autorun
feature is activated on your PC/PG, the SINAUT ST7 setup program starts
Figure 1-24 Master setup dialog
Explanation
Standard software for SINAUT ST7, consisting of
SINAUT TD7 library with blocks for the CPU
SINAUT ST7 configuration and diagnostic software for the
programming device
Electronic manual (German/English)
ST7 software upgrade package for owners of SINAUT ST7
standard software packages less than V4.0
Setup.exe
application.
System Manual, 07/2009, C79000-G8976-C178-07
Station control system