Installing And Putting A Sinaut Modem Into Operation; Overview; Important Notes On Using The Device - Siemens SINAUT ST7 System Manual

Installing and putting a SINAUT modem into
operation
5.1

Overview

Introduction
The following modem variants are available in the SINAUT ST7 range.
MD720-3
MD741-1
MD2
MD3
MD4
5.2

Important notes on using the device

Safety notices on the use of the device
The following safety notices must be adhered to when setting up and operating the device
and during all work relating to it such as installation, connecting up, replacing devices or
opening the device.
Station control system
System Manual, 07/2009, C79000-G8976-C178-07
GSM wireless modem
for data transmission over the GSM mobile wireless network by establishing a
dial-up connection (CSD, Circuit Switched Data) or
for IP.based data transmission with the MSC protocol (GPRS)
max. 9600 bps
GPRS router
for data transmission using the (E)GPRS service (General Packet Radio
Service) of a mobile wireless provider,
secure connection with integrated VPN router and firewall,
max. 54 Kbps
Dedicated line modem
for multipoint connection, can be tapped.
Can also be used as a repeater,
max 19,200 bps
Modem for the analog telephone network,
max. 33,600 bps.
Can also be used a dedicated line modem for a point to-point connection,
max. 33,600 bps in voice band
Modem for the digital ISDN network
max. 64,000 bps
5
181