Siemens SINAUT ST7 System Manual page 200

Installing and putting a SINAUT modem into operation
5.5 MD2 dedicated line modem
Figure 5-11
When the MD2 modem ships, all DIL switches are in the OFF position. This corresponds to
the following basic setting:
● Transmit level –6 dB
● 4-wire mode
● Channel 1 ON (fixed setting for 4-wire mode)
● Baud rate 1200 bps
● Normal operating mode
● Message consists of 11-bit asynchronous characters
● Control output switched with RTS (only relevant for wireless connection)
The following table contains more information on configuring these default settings
individually.
200
Possible settings with the DIL switches accessible from above
System Manual, 07/2009, C79000-G8976-C178-07
Station control system