Siemens SINAUT ST7 System Manual page 20

Introduction to the SINAUT ST7 system
1.3 SINAUT TIM communication modules
TIM 3V-IE Advanced
Cable length
•
•
•
Power supply
Current consumption
•
•
Power loss
Permitted ambient conditions
•
•
•
Construction
•
•
•
Degree of protection
Configuration
•
•
•
TIM can be operated in the role
•
•
•
No. of TIM 3V-IE Advanced modules per S7-300
Local communication
•
•
•
•
Work memory required on the S7 CPU
•
•
20
RS-232
RS-485
RJ-45
From backplane bus
From 24 V DC
Operating temperature
Transport/storage temperature
Relative humidity
Module format
Dimensions (W x H x D) in mm
Weight
Software for PG
Software for CPU (optional)
Storage of TIM configuration data
Station
Node station
Master station
Over backplane bus with the S7-300-CPU
Over backplane bus with other TIMs in the
rack
Over MPI port of the S7-300-CPU
CPUs, TIMs, and/or PCs
Over Ethernet interface with CPUs, PCs and
other TIMs
SINAUT TD7 on CPU (TD7onCPU)
SINAUT TD7 on TIM (TD7onTIM)
max. 6 m
•
max. 30 m
•
max. 10 m
•
24 V DC; min. 20.4 V; max. 28.8 V
200 mA
•
typically 160 mA, max. 200 mA
•
5.8 W
0 °C through +60 °C
•
-40 °C through +70 °C
•
Max. 95 % at +25 °C
•
Compact module for S7-300, single width
•
40 x 125 x 120
•
Approx. 250 g
•
IP 20
SINAUT ST7 configuration software
•
for PG
SINAUT TD7 block library for CPU
•
- on TIM-internal flash memory;
•
- on MMC of the S7-300-CPU
yes
•
yes
•
yes
•
Several: Number depends on the communication
resources of the S7-300 CPU
Possible over TD7onCPU and
•
TD7onTIM
Possible
•
with other Possible over TD7onCPU (for S7-300 and
1) •
S7-400) and S7 communication (for
ST7cc/ST7sc and TIMs)
Possible over TD7onCPU (for S7-400) and S7
•
communication (for ST7cc/ST7sc and TIMs)
At least 20 KB; actual requirements depend
•
on the amounts of data and range of functions
Best case, 0 bytes
•
System Manual, 07/2009, C79000-G8976-C178-07
Station control system