Siemens SINAUT ST7 System Manual page 97

Station control system
Hide thumbs Also See for SINAUT ST7:
Table of Contents

Advertisement

Dial-up network configuration
Dial-up network configurations
Figure 2-9
Dial-up network configurations
Station control system
System Manual, 07/2009, C79000-G8976-C178-07
Notes
Network type:
Analog telephone or
digital ISDN *)
Protocol: SINAUT ST7 and ST1
Mode:
Spontaneous
*) A combination of analog and ISDN
connections is not possible if SINAUT
modems are used.
Special hybrid modems are required for this
purpose.
Network type: Mobile radio network (GSM)
Protocol:
SINAUT ST7 and ST1
Mode:
Spontaneous
Network
Combination of fixed
type:
network and
mobile radio network *)
Protocol: SINAUT ST7 and ST1
Mode:
Spontaneous
*) Fixed network connections, either analog
or ISDN; ISDN is recommended if
combined with mobile radio.
Network
Dial-up network with 2
type:
control centers
1)
The example here shows a
hybrid network consisting of
fixed- and mobile radio network
Protocol:
SINAUT ST7 and ST1
Mode:
Spontaneous
1) More than two control centers be used
2) Fixed network connections, either analog or ISDN;
ISDN is recommended if combined with mobile
radio.
Network
Combination of dedicated line
type:
and fixed network via
node station *)
Protocol: SINAUT ST7 and ST1
Mode:
Polling (dedicated line)
Spontaneous (dial-up network)
*) Fixed network connections, either analog
or ISDN
Network structures and topologies
2.2 Configurations
2)
Master (control center)
Station
Node station
97

Advertisement

Table of Contents
loading

Table of Contents