Auto Answering - AT&T SB67030 User Manual

Auto Answering

You can use the Deskset menu settings to set your Deskset to answer calls automatically, without your having to touch the phone
to answer. When you enable Auto Answer,
since Auto Answer does not work if they are on.
To respond to an Auto Answered call:

12:30PM Thu Feb 25 2010
EXT 249
John Smith
2 New Missed Calls
5 New Messages
Press or to mov e highlight, then
press SELECT.
DND DND DND CallFw d Page
Figure 286. Idle Screen with Auto
Answer Indicator
12:30PM Thu Feb 25 2010
Graham Bell 232-555-0176 2:51
Call Answered.
Speak after the tone.
Transfer Transfer Conf Park
Figure 287. Call Auto Answered
Incoming Calls
Synapse SB67030 and Accessories User's Guide
appears at the top of the Deskset screen if
In Idle mode, all incoming calls ring for the amount of time specified in the Auto
ANS ON
Answer Delay. See
second notification screen appears, as shown in Figure 287, and you hear a warning
tone. (The caller does not hear the tone.)
Talk after the tone.
If the Auto Answer Delay is set to zero, you hear no ring. Instead, the Call
Answered screen appears and you hear the warning tone.
Quick
Dial
More 1/2
If you do not want the Deskset to automatically answer the call, you can press
CANCEL to send the call to the Call Forward–No Answer target. See
and Call Forward–No Answer" on page
If there are multiple incoming calls, Auto Answer applies to the first (oldest) incoming
call. Subsequent incoming calls are handled according the Call Forward–No Answer
setting.
Auto Answer does not apply to Ring Group calls. See
page 209.
Quick
Dial
More 1/3
"Automatic Answering" on page
80.
215
and are not active,
85. After the last ring, a two-
"Call Forward All
"Incoming Call Indication" on