Recording An Introduction To Send With A Forwarded Message - AT&T SB67030 User Manual

Recording an Introduction to Send with a Forwarded Message

You can record an audio introduction to send with a forwarded message. To begin recording the introduction, press
forwarding a message.
To record a message introduction:

Forward Message
Message Introduction
Press Record to create a short (less Press Record to create a short (less Press Record to create a short (less
than 30 seconds) introduction. than 30 seconds) introduction. than 30 seconds) introduction.
Record
Figure 205. Forward Message
Introduction
Record Message
Message Introduction
RECORDING
Duration: 6s
Press Stop when y ou are f inished
recording
Stop
Figure 206. Forward Message
Introduction Recording
Voicemail
Synapse SB67030 and Accessories User's Guide
1. Press
Message Introduction screen displays, as shown in Figure 205 displays.
2. Press
RECORDING displays, as shown in Figure 206.
3. When finished recording, press
automatically stops recording. The screen shown in Figure 207 displays.
Quick
You have options to play, delete, and record the announcement again.
Dial
Exit
4. Press
Message screen as shown in
159. [Message Introduction
page
Attached] displays on the screen.
5. Press
the introduction message attached.
Quick
Dial
after selecting the destination for a forwarded message. The
to begin recording. The soft key changes to
. Reaching the 30-second limit
to display the Forward
Figure 196 on
to forward the message with
163
and the word
Record Message
Message Introduction
Duration: 23s
Press Play to rev iew intro or Record to
create a new intro.
Play Delete Record
Figure 207. Message Introduction
while
Quick
Dial
Send