AT&T SB67030 User Manual page 259

To resolve problems with a cordless device:

For features or audio problems, make sure that the Deskset associated with the cordless device does not share the problem.
If it does, look in Deskset Troubleshooting. See
1. Verify that the device battery has power.
When removed from the charger, the Handset screen is lit for about 30 seconds.

When removed from the charger, the Headset emits a dial tone or three beeps when you press ON/

If there is no power, see the Handset or Headset installation sections of the Synapse Administrator's Guide at
www.telephones.att.com/synapseguides
2. Verify that the Deskset Cordless Settings screen indicates that the device is registered.
Press MENU –> 2 –> 6.

If the Handset is not registered, register it:

a. Place the Handset in the charger.
b. Register the Handset at the Deskset. Press MENU –> 2 –> 6 –> 1 –>
If the Headset is not registered, register it:

a. Place the Headset in the charger.
b. Register the Headset at the Deskset. Press MENU –> 2 –> 6 –> 2 –>
3. See the Handset or Headset installation sections of the Synapse Administrator's Guide.
Troubleshooting
Synapse SB67030 and Accessories User's Guide
"Other Deskset Features" on page 282.
259
.
OFF
.
.