[Handset] Cordless Handset Battery Charging
Place the Handset in the charger when not in use. When fully charged, the Handset battery provides approximately five hours of
talk time or three days of standby time.
To charge the Handset battery:
Figure 22. Handset in Charger
Overview
Synapse SB67030 and Accessories User's Guide
Place the Handset in the charger, as shown in
Figure 22.
Charge Light
The CHARGE light is on when the
Handset is charging.
If the Handset has not yet been
registered, the Register screen
shown in Figure 23 displays within 15
seconds. Follow the directions on the
screen to register the Handset to a
Deskset. See the AT&T SB67040 Cordless Handset Quick Start Guide
for registration instructions.
46
12:00a Jan. 00
12:00a Jan. 00
REGISTER
1/3
To register Handset:
1. Go to your
Deskset.
2. Press MENU.
3. Select User
Figure 23. Register Screen