[Handset, Headset] Deregistering A Cordless Accessory - AT&T SB67030 User Manual

[Handset, Headset] Deregistering a Cordless Accessory

You must deregister cordless accessories before you can register them to different Desksets. If you remove a Deskset from the
system, first deregister any cordless accessories.
To deregister a cordless accessory:

Cordless Handset Registration
Cordless Handset is currently
Registered.
Press DeReg to deregister the Cordless
Handset.
DeReg
Figure 83. Handset Registered
Cordless Handset Registration
Are you sure you want to
deregister the Cordless
Handset?
Press Y es to deregister or No to cancel.
Yes
Figure 84. Deregistration
Confirmation
Deskset Settings
Synapse SB67030 and Accessories User's Guide
1. Press MENU, then 2, and then 6 to display the Cordless Settings menu shown in
Figure 77 on page
The following procedure describes deregistering the Cordless Handset. The
process is identical for the Cordless Headset, except in Step 2, you press 2, rather
than 1 to deregister the Cordless Headset.
2. Press 1 to display the Cordless Handset Registration menu shown in Figure 83.
Quick
3. Press
Dial
Exit
shown in Figure 84 displays.
4. Press
The Deskset screen then displays Cordless
Handset is currently Not Registered, as
shown in Figure 85. The REGISTER screen
appears on the Cordless Handset, as shown
in Figure 79 on page
Headset ON/OFF light slowly flashes.
5. Press
displays.
No
90.
. The confirmation message
to confirm deregistration.
90. The Cordless
. The Cordless Settings menu
93
Cordless Handset Registration
Cordless Handset is currently
Not Registered .
Place Cordless Handset in charger.
Register
Press to begin process.
Register
Figure 85. Handset Not
Registered
Quick
Dial
Exit