[Handset] Setting The Sounds - AT&T SB67030 User Manual

[Handset] Setting the Sounds

To adjust the sound:

12:30p Feb 23
SETTINGS
EXT 249
1. Display
John Smith
2. Sounds
3. Restore Default
2 Missed Calls
4. Deregister
5 New MSGs
EXIT
Figure 103. Settings Menu
SOUNDS
Ringer Volum e 3
Ringtone [ 5 ]
Key Beeps [ On ]
EXIT
Figure 104. Sounds Menu
Deskset Settings
Synapse SB67030 and Accessories User's Guide
1. Press OPTIONS, then 5 to display the Settings menu shown in Figure 103.
2. Press 2 to display the Sounds menu shown in Figure 104.
3. Press the or Navigation key to cycle through audio options:
To adjust the ringer volume from 0 to 6, press the

the volume to zero silences the ringer. The ringer sounds as it is adjusted. You can
also alter the ringer volume in the Idle mode by pressing the Handset volume control,
.
To choose one of nine ringtones, press the

Ringtone. To select the ringtone, press the
applies to the Cordless Handset.
To change whether there are Key Beeps, press the

Key Beeps. Press the
4. To accept the adjustments and return to the Settings menu shown in Figure 103, press
.
Navigation key once to highlight
or
Navigation key to adjust the Key Beeps On or Off.
or
104
or Navigation key. Decreasing
Navigation key. This setting only
Navigation key twice to highlight