Cover Sheet Feeder Size Adjustment - Konica Minolta bizhub c650 User Manual

Utility mode
If the folding position is too far on the right side of the
paper, touch [-] under "Adjust Value" to increase the
adjustment (between -0.1 mm and -12.8 mm).
Adjust values so that the distance between the left
edge of the paper and the 2nd Z-folding position is 2
mm or more.
8
Touch [OK].
– To cancel the setting and select the default, press the [Reset] key.
The folding positions are adjusted.
If no adjustment of the folding positions were necessary in step 7, this completes the procedure.
9
Use the "Z-Fold" setting to print another sample copy.
10
Check the print result.
– Check that the folding positions were adjusted.
– If more adjustment is necessary, repeat steps 6 through 9.

Cover Sheet Feeder Size Adjustment

The sensors for detecting the size of paper loaded in the paper trays of the optional post inserter can be
adjusted.
Note
[Cover Sheet Feeder Size Adjustment] appears only if optional post inserter is installed.
1
Display the Administrator Setting screen.
– For details on displaying the Administrator Settings screen, refer to "Displaying the Administrator
Settings screen" on page 11-37.
2
Touch [1 System Settings].
The System Settings screen appears.
C650
1st Z-fold position
2nd Z-fold position
2 mm or more
11
11-67