Basic copy operations
–
The factory default settings for this machine are listed below.
[Color]: Auto Color
[Paper]: Auto Paper Select
[Zoom]: Full Size (100.0%)
[Duplex/Combine]: 1 > 1
[Quality/Density]: Text/Photo (Printed Photo)
–
For details on selecting settings in the Original Setting screen, refer to page 2-16.
–
For details on selecting a Color setting, refer to page 2-29.
–
For details on selecting a Paper setting, refer to page 2-31.
–
For details on specifying a Zoom setting, refer to page 2-34.
–
For details on selecting the document and copy settings, refer to page 2-43.
–
For details on selecting the document image quality, refer to page 2-50.
–
For details on selecting a copy density setting, refer to page 2-53.
–
For details on specifying combined copy settings, refer to page 2-47.
–
For details on selecting Finishing settings, refer to page 2-58.
–
For details on selecting the Fold/Bind settings, refer to page 2-68.
–
For details on specifying settings to not rotate the image, refer to page 2-79.
–
For details on specifying settings for the Application functions, refer to page 7-2.
4
Using the keypad, type in the desired number of copies.
–
If the number of copies was incorrectly entered, press the [C] (clear) key in the keypad, and then
specify the correct number of copies.
5
Press the [Start] key.
–
To stop the copy operation being performed, press the [Stop] key. For details, refer to page 2-81.
–
The next copy operation can be queued while a copy operation is being performed. For details, refer
to page 2-80.
C650
2
2-3