Konica Minolta bizhub c650 User Manual page 549

Utility mode
– To specify no maximum for color and black prints, touch [No Limit].
18
Touch [Total], [Color] or [Black], and then use the keypad to type in the desired value.
– Touch [All Users] to apply the settings in the current screen to all registered users. Touch [All Users],
touch [OK], and then touch [OK] in the next screen that appears.
19
Touch [OK].
The maximum number of prints allowed is set.
20
To use authentication unit (biometric type) or authentication unit (IC card type), touch [Register Auth.
Info.].
– [Register Auth. Info.] appears only if an authentication unit is installed on this machine.
– For details on using the authentication unit, refer to the User's Guide for the authentication unit .
The Register Auth. Info. screen appears.
21
Touch [Edit].
– When using authentication unit (biometric type), place a finger on the authentication unit and
register the vein patterns.
– When using authentication unit (IC card type), place an IC card on the authentication unit and
register the card information.
22
Touch [Function Permission].
The Function Permission screen appears.
23
Touch the button for the desired setting for each operation, and then touch [OK].
– To permit the operation to be performed, touch [Allow].
– To prohibit the operation to be performed, touch [Restrict].
– Touch [All Users] to apply the settings in the current screen to all registered users. Touch [All Users],
touch [OK], and then touch [OK] in the next screen that appears.
– With "Print Scan/Fax TX", printing can be prevented when scanning or faxing a document saved in
a box.
C650
11
11-88