Konica Minolta bizhub c650 User Manual page 28

Before making copies
No. Part name
28 Finisher connector
29 Filter
30 Power cord
31 Dehumidifer heater power
switch
32 Jack for connecting a tele-
phone
(TEL PORT2)
33 Telephone jack 2
(LINE PORT2)
34 Jack for connecting a tele-
phone
(TEL PORT1)
35 Telephone jack 1
(LINE PORT1)
36 RS-232C port
37 USB port (type A)
USB 2.0/1.1
38 External controller port
39 Internal controller port
40 USB port (type B)
USB 2.0/1.1
41 RS-232 port
42 Network connector
(10Base-T/100Base-
TX/1000Base-T)
43 Ozone filter
C650
Description
Used for connecting the finisher hookup cord.
Collects the toner dust generated in the machine.
Supplies power to the machine.
Used to turn the dehumidifer heater on and off.
Turning on the dehumidifer heater reduces moisture in the paper.
Used for connecting the cord from a telephone.
Used for connecting a general subscriber line.
This jack is used when the optional fax multi line is installed.
Used for connecting the cord from a telephone.
Used for connecting a general subscriber line.
Used for connecting the JScribe IC card reader/writer.
Used for connecting the USB cable for the authentication unit (biometric type),
the authentication unit (IC card type) or external memory (USB memory).
Used for connecting the cable from the image controller.
Used for connecting the internal controller.
Used for making connections when the machine is used as a USB printer.
Used for connecting the modem for CS Remote Care.
Used for connecting the network cable when this machine is used for network
printing and network scanning.
Collects the ozone generated in the machine.
1
1-6