Color Registration Adjust; Adjusting The Color Registration For Yellow, Magenta And Cyan - Konica Minolta bizhub c650 User Manual

Utility mode
11.9

Color Registration Adjust

Adjusting the color registration for yellow, magenta and cyan

The color registration can be adjusted if color shifts can be seen in the print result.
Each color can be adjusted for plain paper, thick paper 1/1+, 2, 3 or thick paper 4.
The procedure for adjusting the color registration is the same for yellow, magenta and cyan.
The following procedure uses A3-size plain paper to adjust the color registration for cyan.
0 The test pattern can be printed on A3 w, 11 × 17 w, A4 v or 8-1/2 × 11 v paper that can only be loaded
into the bypass tray.
1
Display the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to "Displaying the Administrator
Settings screen" on page 11-37.
2
Touch [1 System Settings].
The System Settings screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [7 Color Registration Adjust].
The Color Registration Adjust screen appears.
5
Touch [3 Color Registration Adjust (Cyan)].
The Color Registration Adjust > Cyan screen appears.
6
Load the paper into the bypass tray.
7
Press the [Start] key.
A test pattern is printed.
8
Check the distance from the reference black lines to the
cyan lines in the test pattern along the X and Y directions.
C650
Y
X
11
11-69