Konica Minolta bizhub c650 User Manual page 178

Additional copy operations
– There are six Check Job Settings screens. The number to the right of the screen title indicates the
number of the currently displayed screen.
– To display the previous screen, touch [←Back]. To display the next screen, touch [Forward→].
6
Touch [Close].
The Recall Copy Program screen appears again.
7
Again touch the button for the copy program registered with the copy settings to be recalled.
– If [OK] is touched with no copy program selected, the Basic screen appears again without a copy
program being recalled.
8
Touch [OK].
The programmed copy settings are recalled and the Basic screen appears again.
9
Press the [Start] key.
Copying begins with the recalled copy settings.
Note
To stop recalling a copy program, press the [Reset] key or the [Mode Memory] key or touch [Cancel].
C650
3
3-19