Konica Minolta bizhub c650 User Manual page 542

Utility mode
– To stop all jobs when the limit specified with user authentication or account track is reached, touch
[Stop Job].
11
Specify a setting for "Number of User Counters Assigned".
– Press the [C] (clear) key to erase the value, and then use the keypad to specify the desired value
(between 1 and 999).
– If user authentication and account track settings have been applied, counters can be assigned to
both accounts and users, and counts for both can be totaled.
12
Specify "Ticket Hold Time Setting".
– Use the keypad to type in the time. (1 to 60 minutes)
– Specify the holding time of Kerberos authentication ticket. The holding time setting is applied when
Active Directory is selected as the authentication server type.
13
Touch [OK].
– If the setting for "User Authentication", "Account Track" or "Number of User Counters Assigned"
was changed, the message "Are you sure you want to clear all data?" appears.
14
Touch [Yes], and then touch [OK].
– To stop clearing the usage data without changing the settings, touch [No].
– If the setting for any of the following is changed, the data is not cleared.
"Public User Access", "When # of Jobs Reach Maximum", "Synchronize User Authentication &
Account Track" or "Ticket Hold Time Setting"
– To cancel the setting and select the default, press the [Reset] key.
The authentication method is set.
Continue by specifying settings for user authentication and account track.
Reminder
Do not use a name including uppercase and lowercase of the same character for the user name of the
external server. Since the C650 cannot differentiate between uppercase and lowercase letters, the
operation may not be performed correctly.
Note
"Synchronize User Authentication & Account Track" can be specified if "User Authentication" is set to
"ON (External Server)" or "ON (MFP)" and "Account Track" is set to "ON".
If "Synchronize User Authentication & Account Track" is set to "Synchronize", even when "Public User
Access" is set to "Allow", "Public User Access" changes to "Restrict".
"Number of User Counters Assigned for Users" can be specified if "User Authentication" is set to "ON
(External Server)"or "ON (MFP)" and "Account Track" is set to "ON".
If the number of user counters is set to "50", up to 950 accounts can be registered.
C650
11
11-81