Table of Contents
Advertisement
Colours and display
Colours
The different colours are used to guide the user in the
relevant setting situations.
Orange
Initial settings
Main functions
Blue
Basic settings
Cleaning
White
Values which can be set
Display
The appearance of the symbols, values or the entire
display changes depending on the situation.
Zoom
The setting which is currently being
changed is displayed in an enlarged for-
mat.
A cooking time that is coming to an end
is shown in an enlarged format shortly
before running out (e.g. the last 60 sec-
onds of the timer).
Reduced display After a short time, the display is reduced
and only the most important information
is displayed. This function is preset and
can be changed in the basic settings.
8
Additional information
(
By touching the
symbol, you can call up additional
information. For example, information on the heating
function set or on the current temperature of the
cooking compartment.
Note: During continuous operation, small fluctuations
in temperature are normal after the oven has heated
up.
)
The
symbol is displayed for important information
and action prompts.Important information on safety
and operation mode are occasionally shown
automatically. These messages either disappear
automatically after a few seconds or must be
™
confirmed with
.
Cooling fan
Your appliance has a cooling fan. The cooling fan
switches on during operation. Depending on the
appliance version, the hot air escapes above or under
the door.
After removing cooked food, keep the door closed
until the appliance cools down. The appliance door
must not be left ajar, as adjoining kitchen furniture
may be damaged. The cooling fan continues to run for
a certain time after operation and then switches off
automatically.
Caution! Do not cover the ventilation slots.
Otherwise, the appliance will overheat.
and
(
)
Advertisement
Table of Contents
