Basic Settings - Gaggenau BSP 221 Instruction Manual

Hide thumbs Also See for BSP 221:
Table of Contents

Advertisement

Basic settings

Your appliance can be individually adjusted in the
basic settings.
1
Turn the function selector to S.
2
Select "Basic settings" using the rotary selector.
3
Touch the
symbol.
4
Turn the rotary selector to select the required
basic setting.
Basic setting
Brightness
Standby screen
Display screen
Touch field colour
Touch field tone
Touch field tone
volume
Preheating signal
Signal volume
Water hardness
Calibration
Time format
Time
Clock change
20
5
6
7
8
The changes are saved.
Permitted settings
Level 1, 2, 3, 4, 5*, 6, 7, 8
On*/Off
- Clock
- Clock + GAGGENAU logo*
- Date
- Date + GAGGENAU logo
- Clock + date
- Clock + date + GAGGENAU logo
Reduced* / Standard
Grey* / White
Tone 1* / Tone 2 / Off
Level 1, 2, 3, 4, 5*, 6, 7, 8
On* / Off
Level 1, 2, 3, 4, 5*, 6, 7, 8
1-18
Calibrate the appliance
AM/PM / 24 h*
Current time
Manual* / Automatic
%
Touch the
symbol.
Set the basic setting using the rotary selector.
Save with
or cancel with
basic setting.
Turn the function selector to 0 to exit the basic
settings menu.
Explanation
Sets the display brightness
Appearance of the standby screen.
Off: No display. Use this setting to reduce
the standby consumption of your appliance.
On: Several displays can be set, confirm
"On" with
and use the rotary selector to
select the desired display.
The selection is displayed.
Reduced
If set to
the most important information is shown.
Selects the colour of the symbols on the
touch fields
Selects an audible signal for when a touch
field is touched
Sets the volume of the touch field tone
The signal tone sounds when the cooking
compartment has heated up to the required
temperature.
Sets the volume of the audible signal
Use the test kit included to test the water
hardness of your mains water. Set the meas-
ured water hardness.
Adjusts the boiling point
Display the clock in 24 or 12­hour format
Setting the clock
Automatically changes the clock to daylight-
savings time. If automatic: Setting the
month, day and week for when the time
should be changed over. To be set for both
summer and winter time.
'
and exit the current
, after a brief period only

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bsp 220

Table of Contents