Table of Contents
Advertisement
Accessories
Use only the accessories supplied with the product or
available from the after-sales service. They are
specially designed for your appliance. Ensure that you
always insert the accessories into the cooking
compartment the right way round.
Your appliance is equipped with the following
accessories:
Special accessories
You can order the following special accessories from
your specialist dealer:
GN 114 130 Stainless steel cooking container
GN 1/3, perforated, 40 mm deep, 1.5 l
GN 114 230 Stainless steel cooking container
GN 2/3, unperforated, 40 mm deep, 3 l
GN 124 130 Stainless steel cooking container
GN 1/3, perforated, 40 mm deep, 1.5 l
GN 124 230 Stainless steel cooking container
GN 2/3, perforated, 40 mm deep, 3 l
GN 340 230 Cast aluminium roaster GN 2/3,
165 mm high, non-stick coated
GN 410 130 Stainless steel lid, GN 1/3
GN 410 230 Stainless steel lid, GN 2/3
GR 220 046 Wire rack, chrome-plated, with feet
Only use the accessories as specified. The
manufacturer accepts no liability if these accessories
are used incorrectly.
10
Wire rack
for cookware, cake tins and
casseroles and for roasts
Stainless steel cooking
container, unperforated,
Z
GN
, 40 mm deep
for cooking rice, pulses and
cereals, for baking cake
baked on trays and for
collecting dripping liquid
during steaming
Stainless steel cooking
container, perforated,
Z
GN
, 40 mm deep
for steaming vegetables or
fish, for extracting juice and
for defrosting
Before using for the first time
Here you will find everything you need to do before
using the appliance to prepare food for the first time.
First read the section on
The appliance must be fully installed and connected to
the mains.
After connection to the mains, the "Initial settings"
menu appears in the display. You can now make
settings for your new appliance.
▯
Language
▯
Time format
▯
Time
▯
Date format
▯
Date
▯
Temperature format
▯
Water hardness
Notes
‒
The "Initial settings" menu appears only when the
appliance is switched on for the first time after
being connected to the mains or when the
appliance has been without electricity for several
days.
After the appliance is connected to the mains, the
GAGGENAU logo is displayed for approx. 30
seconds before the "Initial settings" menu is
automatically displayed.
‒
You may change the settings at any time (refer to
Basic settings
the
section).
Setting the language
The preset language appears in the display.
1
Turn the rotary selector to select the required
display language.
™
2
Confirm with
.
Note: If the language is changed, the system restarts.
This takes a few seconds.
Important safety information
.
Advertisement
Table of Contents
