Table of Contents
Advertisement
Setting the time format
The two possible formats 24h and AM/PM appear in
the display. The default is the 24h format.
1
Use the rotary selector to select the desired
format.
™
2
Confirm with
.
Setting the clock
The time is shown in the display.
1
Set the desired time using the rotary selector.
™
2
Confirm with
.
Setting the date format
The three possible formats D.M.Y, D/M/Y and M/D/Y
appear in the display. The default is the D.M.Y format.
1
Use the rotary selector to select the desired
format.
™
2
Confirm with
.
Setting the date
The preset date appears in the display. The day
setting is already active.
1
Set the day using the rotary selector.
C
2
Touch the
symbol to switch to the month
setting.
3
Set the month using the rotary selector.
C
4
Touch the
symbol to switch to the year setting.
5
Set the year using the rotary selector.
™
6
Confirm with
.
Setting the temperature format
The two possible formats °C and °F appear in the
display. The default setting is °C.
1
Use the rotary selector to select the desired
format.
™
2
Confirm with
.
Setting the water hardness
"Water hardness" appears in the display.
1
Check the mains water with the included
carbonate hardness test: fill the small
measurement tube with mains water up to the 5 ml
mark.
2
Add drops of indicator solution until the color
changes from purple to yellow.
Important: count the drops and carefully swing
the measurement tube after every drop until the
liquids have mixed thoroughly. The number of
drops corresponds to the water hardness.
3
Use the rotary selector to set the measured water
hardness. The value 12 is set by default.
11
Advertisement
Table of Contents
