Table of Contents
Advertisement
Chapter 2 Useful Features
1.2.1
Main
If you start up the SETUP utility, the Main menu is displayed first.
For details about the options, see the table below.
Option
BIOS Information
BIOS Version
Build Date
Access Level
UEFI Spec Version
Memory Information
Total Memory
System Language
System Date
System Time
60
Parameter
−
(Display only)
(Display only)
(Display only)
(Display only)
−
(Display only)
[English]
Français
Español
Deutsch
Italiano
WWW MM/DD/YYYY
HH:MM:SS
Tips
Be sure to confirm that the date and time in the BIOS parameters are correctly
configured.
Check the system clock monthly. Additionally, if you implement the server in a
system that requires highly accurate time, use of a time server (an NTP server) is
recommended.
If the system time becomes considerably slow or fast over time even though you
regularly adjust it, contact the dealer where you purchased the server or the
maintenance service company for maintenance.
Express5800/R120f-2E, T120f
Description
−
Shows the BIOS version.
Shows the BIOS build date.
Shows the current access level (Administrator or User).
If no password is set, Administrator is shown.
Shows the UEFI Spec version that BIOS supports.
−
Shows the total capacity of installed memory.
Select a display language for SETUP. If you run SETUP
with BIOS Redirection Port enabled (other than
Disabled), English is automatically selected. At that time,
you cannot change setting of System Language.
If BIOS Redirection Port is set to Disabled, the language
set in this option is used at the next startup of SETUP, and
you can change the language setting.
Set the system date.
Set the system time
Maintenance Guide
1. System BIOS
[
]: Factory setting
Advertisement
Table of Contents
