Table of Contents
Advertisement
Chapter 2 Useful Features
5.4
Running LSI Software RAID Configuration Utility in the UEFI
Mode
Use the BIOS Setup utility (SETUP) to start the LSI Software RAID Configuration Utility.
5.4.1 Starting SETUP
Turn on the server and wait for POST to proceed.
After a while, the following message appears at the bottom left of the screen.
Press <F2> SETUP, <F4> ROM Utility
Press <CTRL + P> MEBX
If you press the < F2> key, SETUP starts upon completion of POST and the Main menu is displayed. (You can
also start SETUP by pressing the < F2> key while expanding option ROM.)
If you fail to press the <F2> key or the system proceeds without displaying the following
Tips
screen, restart the system, and then press the <F2> keys on the POST screen.
Express5800/R120f-2E, T120f
Maintenance Guide
5. RAID System Configuration
135
Advertisement
Table of Contents
