Forced Shutdown - NEC Express5800/T120f Maintenance Manual

Chapter 1 Maintenance
7.3

Forced Shutdown

Use this feature when an OS command does not shut down the server, POWER Switch does not turn off the
server, or software reset does not work.
Continue to hold POWER Switch of the server for at least four seconds. The power is forcibly turned off.
To turn on the power back again, wait at least 30 seconds after turning off the power.
R120f-2E
T120f
POWER Switch
(Keep pressing for at least four seconds)
48
Note
If the remote power-on feature is used, cycle the power once to load the OS after
the power has been forcibly turned off, and then turn off the power again by
shutting down the OS.
POWER Switch
(Keep pressing for at least four seconds)
Express5800/R120f-2E, T120f
7. Resetting and Clearing the Server
Maintenance Guide