Table of Contents
Advertisement
Chapter 2 Useful Features
5.3
Procedures for Using Configuration Utility in the Legacy Mode
5.3.1 Create/add configuration
1. Run LSI Software RAID Configuration Utility.
2. From the TOP menu (Management Menu), select Configure, and then New Configuration.
To add settings to an existing configuration, select View/add Configuration.
Run LSI Software RAID Configuration Utility
Create configuration information
(Virtual Drive settings)
Check the Virtual Drive settings
Initialize Virtual Drive
Run Check Consistency
Exit LSI Software RAID Configuration Utility
Important
Creating a configuration by using "New Configuration" clears the existing
configuration. To add configuration to the existing configuration, select "View/add
Configuration".
•
Note
You cannot specify the Virtual Drive capacity on the Easy Configuration menu. Use
New Configuration or View/Add Configuration instead.
•
For RAID10, the Virtual Drive is configured with the maximum capacity. You cannot
specify the capacity.
•
For RAID0, you can skip the step for checking the consistency.
Express5800/R120f-2E, T120f
Maintenance Guide
5. RAID System Configuration
125
Advertisement
Table of Contents
