Chapter 2 Useful Features
6.
Details of EXPRESSBUILDER
EXPRESSBUILDER helps you to install Windows and maintain the server.
EXPRESSBUILDER also provides bundled software and instruction manuals.
6.1
Starting EXPRESSBUILDER
You can start EXPRESSBUILDER by using the following ways.
DVD:
Use the EXPRESSBUILDER DVD by the following two ways:
(1) Insert the DVD into the server, and then restart.
Boot Selection Menu shown in Chapter 2 (5.2 Menus of EXPRESSBUILDER) - (1) Boot Selection
Menu will appear.
(2) Insert the DVD into a computer running Windows.
Autorun Menu shown in Chapter 2 (5.2 Menus of EXPRESSBUILDER) - (4) Autorun Menu will appear.
Internal Flash Memory:
Be sure that the CD/DVD drive has no disc, restart the server and press <F3> key at the following POST
message.
Press <F2> SETUP, <F3> Internal Flash Memory, <F4> ROM Utility, <F12> Network
When EXPRESSBUILDER starts from Internal Flash Memory, Boot Selection Menu shown in Chapter 2 (5.2
Menus of EXPRESSBUILDER) - (1) Boot Selection Menu will appear.
Windows Application:
You can run EXPRESSBUILDER as a Windows application after installing Starter Pack.
Choose NEC from Windows Start menu and run NEC EXPRESSBUILDER or run the shortcut on the
desktop.
When EXPRESSBUILDER is launched as Windows application, Autorun Menu shown in Chapter 2 (5.2
Menus of EXPRESSBUILDER) - (4) Autorun Menu will appear.
172
Express5800/R120f-2E, T120f
6. Details of EXPRESSBUILDER
Maintenance Guide