Table of Contents
Advertisement
Chapter 2 Useful Features
5.3.3 Configure HotSpare
1. Connect a physical device for hot sparing, and then turn on the server.
2. Run LSI Software RAID Configuration Utility.
3. From the TOP menu, select Objects, and then Physical Drive.
The Objects - PHYSICAL DRIVE SELECTION MENU screen appears.
4. Move the cursor onto the physical device to be hot spared, and then press the <Enter> key.
5. Select Make HotSpare.
6. When you select Yes, the display for the physical device changes to "HOTSP".
Connect the physical device
Run LSI Software RAID Configuration Utility
Configure HotSpare
Exit LSI Software RAID Configuration Utility
Objects – PHYSICAL DRIVES SELECTION MENU
PORT #
ONLINE A00-00
0
ONLINE A00-01
1
READY
2
Express5800/R120f-2E, T120f
Maintenance Guide
5. RAID System Configuration
131
Advertisement
Table of Contents
