Table of Contents
Advertisement
Chapter 2 Useful Features
6.3
Utilities in EXPRESSBUILDER
You can run the following utilities when choosing Utilities from Home Menu.
(1) Starter Pack installation (available only on Internal Flash Memory)
Installs Starter Pack to the installed Windows. Starter Pack is usually installed from Setup of Home Menu or
Autorun Menu. Use this feature to install Windows manually without EXPRESSBUILDER DVD.
(2) RAID Configuration Data
Saves or loads the configuration data on a RAID controller.
(3) File Execution
Directly runs an external utility on removal media. Use this feature only for utilities provided by NEC.
(4) Internal Flash Memory (available only on DVD)
Manages Internal Flash Memory with the following commands.
a) Initialize
Clears the data in Internal Flash Memory and initializes (formats) it.
Note that all data in Internal Flash Memory is deleted
b) Update
Copies the data of the EXPRESSBUILDER DVD or other media to Internal Flash Memory.
The data is overwritten and all previous data is cleared.
6.4
CLI for EXPRESSBUILDER
You can operate EXPRESSBUILDER by using Command Line Interface (CLI) on Windows command prompt.
See EXPRESSBUILDER Command Line Interface User's Guide for details.
176
Note
Do not run the file provided by a third party.
•
Tips
The parameter file and RAID configuration data are retained.
•
For the removable media in which the parameter file is saved,
see "/mnt /usr_connect /usb*" (* indicates a number).
Express5800/R120f-2E, T120f
6. Details of EXPRESSBUILDER
.
Maintenance Guide
Advertisement
Table of Contents
