Led Error Messages - Eiki EK-610U Owner's Manual

DLP Projector — Owner's Manual

lED Error Messages

The LED status indicators are located on the rear of the projector. Each LED is defined below.
• power lED
r
eD
Steady Light
Flashing (0.5
sec on/0.5 sec
off)
Off
Off
Note:
During firmware upgrade, the Power LED lights purple, and Lamp LED, Temp LED, and Filter LED light red.
• lamp lED
LeD s
tatUs
r
eD
Steady Light
Flashing (3 sec on/1 sec off) Lamp driver has failed and lamp is in error state.
Flashing (1 sec on/1 sec off) Color wheel has failed.
• Temp lED/Filter lED
LeD s
tatUs
t (r )
emp eD
Steady Light Off
Flashing (0.5 Off
sec on/0.5
sec
Flashing (3 Flashing (1
sec on/1 sec sec on/1 sec
off) off)
Off Steady Light
LeD s
tatUs
p
UrpLe
Off Off
Off Off
Off Steady Light
Flashing (0.5 Off
sec on/0.5 sec
off)
Lamp has failed and is in error state.
f (r )
ILter eD
Over temperature. The projector will shut down.
Fan has failed and is in error state.
Filter has overheated and is in error state.
Filter switch has failed and is in error state.
b
LUe
Standby state (LAN connection is inactive).
Standby state (LAN connection is active).
Power is on and lamp is lighting.
Cooling for an abnormal shutdown.
p
rojector
p
rojector
62
— —
p s
rojector tate
s
tate
s
tate