Output Menu - Eiki EK-610U Owner's Manual

Output Menu

Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OUTpUT and press
the Enter button to enter the OUTpUT menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
I
tem
Aspect Ratio
Overscan
H Digital Zoom
V Digital Zoom
H Digital Shift
V Digital Shift
Image Warping
PIP/PBP
pICTURE
Aspect Ratio
Overscan
H Digital Zoom
OUTpUT
V Digital Zoom
H Digital Shift
V Digital Shift
SETUp
Image Warping
PIP/PBP
OpTIOn
Display an image with the detected size, or resize the image by maximizing
either the height, width or both, or resize to the maximum size possible
while keeping the original aspect ratio.
Remove noise around the image. Overscan Zoom enlarges image 3%
from original size. Overscan Crop cuts 3% of active pixels in four edges of
original image.
Change the size of projector's display area horizontally. If the display area
has been resized by this setting, it can be moved by changing the H Digital
Shift and V Digital Shift settings.
Change the size of projector's display area vertically. If the display area has
been resized by this setting, it can be moved by changing the H Digital Shift
and V Digital Shift settings.
Move the display area horizontally if its size has been changed by the
Digital Zoom setting.
Move the display area vertically if its size has been changed by the Digital
Zoom setting.
Configure the image warping settings. See "Image Warping Menu" on page
34.
Configure the PIP/PBP settings. See "PIP/PBP Menu" on page 35.
DLP Projector — Owner's Manual
OUTpUT
D
escrIptIon
33
— —
Auto
Off
100
100
50
50