Advanced Menu - Eiki EK-610U Owner's Manual

DLP Projector — Owner's Manual

Advanced Menu

Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select pICTURE and press
the Enter button to enter the pICTURE menu. Press the arrow keys (pq) to select Advanced and press
the Enter button to enter the Advanced menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
I
tem
White Peaking
Gamma
Color Temperature
Color Space
Color Settings
Film Mode
DynamicBlack
TM
pICTURE
White Peaking
Gamma
Color Temperature
OUTpUT
Color Space
Color Settings
Film Mode
SETUp
DynamicBlack
TM
OpTIOn
(Video source only) Increase the brightness of whites that are near 100%.
Select the appropriate gamma from Film, Video, Graphics, and Standard.
Change the intensity of the colors. Select a listed relative warmth value.
Select a color space that has been specifically tuned for the input signal.
Use only for analog signals and certain digital sources.
Adjust the gain of the red, green, or blue channel of the image. It will affect
the black and white.
Adjust the offset of the red, green, or blue channel of the image. It will affect
the black and white.
Reset RGB gain/offset to return the factory default settings for color
adjustments.
Control film mode detection and determine whether the original source of
the input video was film or video.
Enable or disable the dynamic black function. Enable this function raises
the contrast ratio dynamically.
Advanced
D
escrIptIon
32
— —
100
VIdeo
Bright
Auto
Off
Off