Moving The Projector; Installing The Projector Properly - Eiki EK-610U Owner's Manual

DLP Projector — Owner's Manual

Moving the projector

When moving the projector, take care of the lens and retract the adjustable foot to prevent damage to the
lens and cabinet.

Installing the projector properly

• Please set the projector on nearly-level.
• Be sure to install the projector properly. Improper installation may reduce the lamp lifetime and even
cause a fire hazard.
• Do not roll the projector more than 20° from side to side.
• Do not put the projector on either side to project an image.
20°
20°
Caution in ceiling installation the projector
• Only qualified personal is authorized for ceiling installation.
• We are not responsible for the hurt and damage caused by ceiling bracket that purchased from
unauthorized dealer even in warranty period.
• Remove the ceiling bracket immediately while not use.
• While installing, torque screwdriver is suggested, don't use electric or impact-type screwdriver.
• Please read the manual of bracket for details.
• The bracket is subject to change without notice.
Exhaust Vent Air Intake Vent
viii
— —