Image Adjustment; Exposure Settings - HIKVISION UD00543B User Manual

two sets of parameters for users to configure.
 Image Adjustment
Brightness describes bright of the image, which ranges from 1 to100, and the
default value is 50.
Contrast describes the contrast of the image, which ranges from 1 to 100, and
the default value is 50.
Saturation describes the colorfulness of the image color, which ranges from 1 to
100, and the default value is 50.
Sharpness describes the edge contrast of the image, which ranges from 1 to 100,
and the default value is 50.
 Exposure Settings
If the camera is equipped with the fixed lens, only Manual is selectable, and the
iris mode is not configurable.
If Auto is selected, you can set the auto iris level from 0 to 100.
The Exposure Time refers to the electronic shutter time, which ranges from 1 to
1/100,000s. Adjust it according to the actual luminance condition.
Gain: Gain of the image can also be manually configured from 0 to 100. The
bigger the value is, the brighter would the image be, and the noise would also be
amplified to a larger extent.
 Day/Night Switch
Select the Day/Night Switch mode according to different surveillance demand.
Day, Night, Auto, Scheduled-Switch, and Triggered by alarm input are selectable
for day/night switch.
Day: the camera stays at day mode.
Network Multi-Sensor Panoramic Dome Camera
Figure 8-2 Day/Night Switch
77