Table of Contents
Advertisement
4. Click Arming Schedule tab to edit the arming schedule for video tampering. The
arming schedule configuration is the same as the setting of the arming schedule
for motion detection. Refer to Task 2: Set the Arming Schedule for Motion
Detection in Section 9.1.1.
5. Check the checkbox to select the linkage method taken for the video tampering.
Audible warning, notify surveillance center, send email and trigger alarm output
are selectable. Please refer to Task 3: Set the Linkage Method for Motion
Detection in Section 9.1.1.
6. Click Save to save the settings.
9.1.3 Configuring Alarm Input
Steps:
1. Enter the Alarm Input Settings interface: Configuration > Event > Basic
Event > Alarm Input.
Network Multi-Sensor Panoramic Dome Camera
Figure 9-7 Alarm Input Settings
91
Advertisement
Table of Contents
