Table of Contents
Advertisement
Note:
If you disable the RTSP authentication, anyone can access the video stream
by the RTSP protocol via the IP address.
3. Click Save to save the settings.
5.4.2 IP Address Filter
Purpose:
This function makes it possible for access control.
Steps:
1. Enter the IP Address Filter interface: Configuration > System > Security > IP
Address Filter
2. Check the checkbox of Enable IP Address Filter.
3. Select the type of IP Address Filter in the drop-down list, Forbidden and Allowed
are selectable.
4. Set the IP Address Filter list.
Add an IP Address
Steps:
Network Multi-Sensor Panoramic Dome Camera
Figure 5-15 RTSP Authentication
Figure 5-16 IP Address Filter Interface
45
Advertisement
Table of Contents
