Table of Contents
Advertisement
10.2 Configure Capture Schedule
Purpose:
You can configure the scheduled snapshot and event-triggered snapshot. The captured
picture can be stored in the local storage or network storage.
Steps:
1. Enter the Capture Settings interface: Configuration > Storage > Storage
Settings > Capture.
2. Go to Capture Schedule tab to configure the capture schedule by click-and-drag
the mouse on the time bar. You can copy the record schedule to other days by
clicking the green copy icon on the right of each time bar.
3. Click Advanced to select stream type.
Figure 10-4 Advanced Setting of Capture Schedule
Network Multi-Sensor Panoramic Dome Camera
Figure 10-3 Capture Configuration
98
Advertisement
Table of Contents
